Home  |  Products  |  BSA Trailer Pumps  |  BSA 14000 HP-D 11" Trailer-Mounted Concrete Pump

Putzmeister BSA 14000 HP-D 11" Trailer-Mounted Concrete Pump

This tough machine is a top performer in high-rise and long distance concrete pumping as well as tunnel construction. The BSA 14000 HP-D 11" has maximum output of 260 cubic yards per hour at pressures up to 1,146 psi with 11-inch x 83-inch material cylinders.

Putzmeister Advantages

Click the tab(s) below for more information.

Only Putzmeister has the technology to offer both high output and high pressure with the same setup.

Simple and reliable, Putzmeister's closed loop, free flow hydraulics (FFH) design provides a smoother, more controllable and economical approach to pumping. The pump has a fully adjustable volume control to allow very slow pumping while retaining full concrete pressure. Convenient to use and easy to service, this exclusive system is known for its performance and reliability worldwide.

 back to top

Our powerful pumps make quick work of tough mixes by handling pumpable consistencies down to a 0" slump with a maximum 2.5" aggregate size.

 back to top

With a 21.2 cubic foot capacity, the RS 905A hopper offers an agitator with safety switch-off, splash guard, vibrator, grate and rubber collar. Its wide opening allows for simultaneous unloading of mixer trucks and provides central lubrication via a manual grease gun.

 back to top

Designed for highway travel and job site use, this steel frame trailer is fully equipped with four manually-operated outriggers and front jack stand with support wheel on towbar.

 back to top

Special hard-chromed material cylinders and automatic central lubrication of the heavy-duty solid rubber pistons assure long service life.

 back to top

The control panel is fully enclosed for weatherproof wear and includes an emergency stop button. The remote control, with 33 feet of cable, featurs pump on/off, pump forward/reverse and stroke change. An auxiliary hydraulic connection on the pump is standrad for the 2100 and 14000 Series.

 back to top

Ideal for high pressure applications, our S-Valve handles even the most extreme mixes with ease. Built for years of durability, its thick-walled valve construction features exclusive hard-chromes material cylinders and multi-piece piston cup design.

 back to top

Specification Tables

Click the tab(s) below for more information.

Performance
Maximum theoretical output* - rod 260 yd³/hr (200m³/hr)
Maximum theoretical output* - piston 182 yd³/hr (139m³/hr)
Maximum theoretical pressure* - rod 1,146 psi (79 bar)
Maximum theoretical pressure* - piston 1,668 psi (115 bar)
Technical Information
Material cylinders 11" x 83" (280x2,100mm)
Variable volume 0 to full
Chromed cylinders Standard
Hydraulic system FFH-HD
Hydraulic system pressure 5,075 psi (350 bar)
Hydraulic cylinders 6.3" x 3.5" (160 x 90mm)
Outlet diameter 8" (200mm)
Maximum size aggregate 2.5" (63mm)
Valve & Hopper
S Valve: S-2318 9" to 7" (230 to 180mm)
Hopper model RS 905A
Hopper capacity 21.2 ft³ (600L)
Hopper height 51" (1,295mm)
Maximum strokes per minute - rod 26
Maximum strokes per minute - piston 18
Dimensions
Trailer type Tandem axles
Length 264" (6,708mm)
Width 77" (1,950mm)
Height 117" (2,972mm)
Approximate weight 23,800 lbs (10,800kg)

* Specifications subject to change without prior notice. Maximum theoretical values listed above. Maximum output and pressure cannot be achieved simultaneously.

Minimum slump and maximum aggregate size are dependent upon concrete mix design, site conditions and pipeline diameter. Special equipment configurations required to operate on piston side.
Photos and drawings are for illustrative purposes only. For available options, please contact the factory.
 back to top
Engine Specifications
Diesel engine Caterpillar
Power 630 hp (470kW)

* Specifications subject to change without prior notice. Maximum theoretical values listed above. Maximum output and pressure cannot be achieved simultaneously.

Minimum slump and maximum aggregate size are dependent upon concrete mix design, site conditions and pipeline diameter. Special equipment configurations required to operate on piston side.
Photos and drawings are for illustrative purposes only. For available options, please contact the factory.
 back to top