Driven For Performance
Long Reaching Five-Section, Z-Fold Boom
Low Speed Steer Assist System Increases Maneuverability
Ideal For High Presssure Applications and Harsh Mixes
Home  |  Products  |  Boom Pumps  |  63Z-Meter Truck-Mounted Concrete Boom Pump   Spec Sheet   Find a Distributor

Putzmeister 63Z-Meter Truck-Mounted Concrete Boom Pump

When you need a big machine with excellent maneuverability, the 63Z is your choice. The versatile five-section Z-Fold boom has 203 feet 9 inches of vertical reach on a chassis with rear steering. Putzmeister’s Low Speed Steer Assist is the first of its kind – three computer controlled steering axles in the front and two in the rear provide a very tight turning radius of only 58 feet 6 inches.

Animations

Click the tab(s) below for more information.

Exclusive Ergonic® Control System

Ergonic Brochure

Click the tab(s) below for more information.

• Reduced boom bounce
• Enhanced job site safety
• Improved ergonomics for the operator
• Precise and consistent vertical control of the end hose
• Efficiency and operational safety with semi-automatic folding

 back to top

Available on select models, OneTouch automatically moves all boom sections and slewing in tandem while keeping the end hose consistently level. One simple operation ensures a smooth, uninterrupted concrete flow and more efficient pour.

 back to top

• A smoother pumping process
• Reduced component wear
• Low fuel consumption
• Fewer vibrations in the machine and boom
• Fully electronic control of the concrete pump
• Fewer hydraulic components
• Optimized output for greatest efficiency

 back to top

An integral component of the EPS module, Ergonic Output Control (EOC) reduced fuel consumption, wear and noise. EOC automatically adjusts the engine speed to the minimum required for the delivery rate specified by the operator on the remote control.

 back to top

The Ergonic system features the Ergonic Graphic Display (EGD), a three-inch square color LCD screen on the modular control box. When the equipment is on, the main menu shows:
• Hydraulic fluid temperature
• Operating hours
• Delivery pressure/delivery pressure limit
• Delivery rate/delivery rate limit

 back to top

Putzmeister Advantages

Click the tab(s) below for more information.

Only Putzmeister has the technology to offer both high output and high pressure with the same setup.

Cell .16H
Rod side output 210 yd³/hr (160m³/hr)
Piston side output 141 yd³/hr (108m³/hr)
Rod side pressure 1233 psi (85 bar)
Piston side pressure 1885 psi• (130 bar•)
Material cylinder diameter 9" (230mm)
Stroke length 83" (2100mm)
Rod side strokes per minute 31
Piston side strokes per minute 21
 back to top
Cell .18H LS
Piston side output 238 yd³/hr (182m³/hr)
Piston side pressure 1233 psi (85 bar)
Material cylinder diameter 10" (250mm)
Stroke length 83" (2100mm)
Piston side strokes per minute 29
 back to top

Ideal for high-pressure applications, our S-Valve handles even the most extreme mixes with ease. Built for years of durability, its thick-walled valve construction features exclusive hard-chromed concrete cylinders and multi-piece piston cup design.

 back to top


Putzmeister boom pumps feature a single proximity switch in each position. Redundancy is not necessary because the Ergonic Pump Control System can override the switches if necessary.

 back to top

All Putzmeister boom pumps feature the robust yet lightweight EZ Clean Out RS 909 hopper, which is engineered for performance and durability. Offering 19.4 cu. ft. (550L) capacity, the hopper uses one hard-faced remixer paddle motor and grate-mounted vibrator. The grate is constructed of high-strength steel with welded connections for a long wear life.

An innovative RFID safety switch incorporated in the hopper disables the machine when the grate is opened.

 back to top

Putzmeister pumps feature an exclusive free flow hydraulic system that performs to higher standards at lower cost than other pumps. Its valve-less intelligent monitoring system takes oil into the drive cylinders with no loss of pressure to enhance the pump’s service life while increasing power and convenience.







 back to top

Our exclusive Econo-Gear™ helps achieve greater fuel efficiency by performing the setup, pumping and cleanup operations in a gear that allows for the use of a lower engine speed. In addition to fuel savings, Econo-Gear also reduces stress on wear parts and lowers noise levels. 

 back to top

Low ceiling heights and unusual concrete placing challenges are easily tacked with the versatility of Putzmeister’s Z-Boom design. Booth the Multi-Z and Z-Fold configurations can begin a pour before the boom is fully unfolded. Additionally, these four- and five-section booms can easily maneuver around obstacles to achieve the maximum reach and flexibility possible.

 back to top

Putzmeister’s One-Sided Support (OSS) outrigger system allows the boom pump operator to reduce the outrigger span on the non-working side of the unit. Through a series of sensors, OSS safely achieves set up in confined areas without full outrigger deployment. The sensors maintain a defined working envelope that prevents the operator from positioning the boom outside of a safe operational range.

 back to top

Putzmeister’s HBC-Radiomatic power boost and frequency hopping remote control system ensure minimum interference with other frequency transmitters. A fully proportional cable remote is also standard. Unlike other systems, the radio and cable remote systems are completely independently, offering redundancies to ensure complete proportional operation with either control.

 back to top

Specification Tables

Click the tab(s) below for more information.

Boom Style
Boom Style Z-Fold
Number of sections 5
Height & Reach
Vertical reach 203' 9" (62.10m)
Horizontal reach 190' 7" (58.09m)
Reach from front of truck 176' 7" (53.82m)
Reach depth 151' 11" (46.30m)
Unfolding height 75' 6" (23.01m)
Boom Section Articulation
1st section articulation 90°
2nd section articulation 180°
3rd section articulation 180°
4th section articulation 264°
5th section articulation 210°
Boom Section Length
1st section length 35' 5" (10.80m)
2nd section length 31' 6" (9.60m)
3rd section length 30' 8" (9.35m)
4th section length 44' 3" (13.49m)
5th section length 48' 9" (14.86m)
Outriggers
Outrigger spread: L-R-front swing out, telescope & extend down 39' 8" (12.10m)
Outrigger spread: L-R-rear hydraulically swing out & extend down 42' 1" (12.80m)
Outrigger load: Front 101,165 lbf (450 kN)
Outrigger load: Rear 92,175 lbf (410 kN)
One-Sided Support (OSS) Outriggers
Safe operational zone 180°
Outrigger spread: L-R-front swing out, telescope & extend down 29' 5" (8.97m)
Outrigger spread: L-R-rear hydraulically swing out & extend down 28' 5" (8.66m)

All specifications apply to units mounted on PMA stock truck - MACK MRU 613 with .16H pump cell.
Weights are approximate and include pump, boom, truck, driver and some fuel. Varies with options selected.
Dimensions will vary with different truck makes, models and specifications.
Maximum theoretical values listed.
 back to top
Based on Model MACK MRU 613 with .16H pump cell
Length 54' 7" (16.6m)
Width 8' 2" (2.50m)
Height 12' 10" (3.90m)
Wheelbase 280" (7112mm)
Front axle weight 55,700 lbs (25,265kg)
Rear axle weight 76,260 lbs (34,591kg)
Approx total weight 131,980 lbs (59,857kg)

All specifications apply to units mounted on PMA stock truck - MACK MRU 613 with .16H pump cell.
Weights are approximate and include pump, boom, truck, driver and some fuel. Varies with options selected.
Dimensions will vary with different truck makes, models and specifications.
Maximum theoretical values listed.
 back to top

Diagrams

Click the tab(s) below for more information.



print

End hose not to be operated in caution area.
Photos and drawings are for illustrative purposes only.
Dimensions will vary with different truck makes, models and specifications.
For available options, please contact the factory.

 back to top
print

Photos and drawings are for illustrative purposes only.
Dimensions will vary with different truck makes, models and specifications.
For available options, please contact the factory.

 back to top
print

Photos and drawings are for illustrative purposes only.
Dimensions will vary with different truck makes, models and specifications.
For available options, please contact the factory.

 back to top
print

With One-Sidded Support (OSS) outriggers.
End hose not to be operated in caution area.
Photos and drawings are for illustrative purposes only.
Dimensions will vary with different truck makes, models and specifications.
For available options, please contact the factory.

 back to top