Home  |  Products  |  Boom Pumps  |  47Z-Meter Next Generation Truck-Mounted Concrete Boom Pump   Spec Sheet   Find a Distributor

Putzmeister 47Z-Meter Next Generation Truck-Mounted Concrete Boom Pump

From increased maneuverability and ease of use, to a brand new, state-of-the-art remote control system, the redesigned 47Z-Meter redefines innovative engineering. With the five section, Z-Fold boom and new, more robust pedestal design, the pump can navigate even the most congested job sites.

Exclusive Ergonic® Control System

Ergonic Brochure

Click the tab(s) below for more information.

On the EGD, the machine operator can view all relevant machine data and adjust individual parameters. Up-to-date feedback and system information for the machine appear in real time in the remote control display.

Thanks to a reliable fault management system with double protection for the control system (electronic and hydraulic), the machine is fully operational in the event of a fault, even in emergency operation. If certain components fail that are not relevant for safety, they can be switched off, enabling work to continue without interruption.

 back to top

The computer-aided EPS control system regulates operation of the concrete pump and the truck engine. This results in fewer hydraulic components, which means less wear and reduced energy consumption.

The pumping process is smoother overall, and vibrations in the boom and machine are kept to a minimum. This takes stress off the concrete pump and truck — as well as local residents and construction workers, who will enjoy a much quieter operation.

EPS at a Glance
• Low wear
• Reduced vibrations in the machine and boom
• Optimized, smooth pumping process
• Includes EOC (Ergonic® Output Control)
• Fewer components, meaning lower service costs
• Practical and reliable fault management
• High machine availability due to high-quality components

 back to top

EOC allows for less fuel consumption, wear and noise. The machine operator sets the output using a rotary knob on the radio remote control and EOC controls the optimum speed. It is not possible to set the output to minimum and the engine speed to full throttle at the same time with EOC. If the boom is not moved and the pump is off, the engine will revert to idling speed. This can reduce fuel consumption by up to 10%.

EOC at a Glance
• Lower fuel consumption and reduced wear due to optimal engine speed 
• Fuel savings of up to 10%
• Avoids unfavorable ranges
• Automatic idling speed if there are no boom movements and the pump is off

 back to top

The remote control on the latest generation Ergonic 2.0 is easy to handle and extremely lightweight — a whole 30 percent lighter than the previous model.

Due to its comfort, well thought-out menu, and ease of controlling the pump, this system is extremely popular among machine operators. Additionally, it features a large, high-resolution color display, offering a complete overview with clear readability.

  • Ergonomic boom control with two joysticks
  • Can also be used as a cable remote control
  • Easy replacement of the radio remote control thanks to radiomatic(R) iLOG Technology
  • Lithium ion battery for a working time of up to 17 hours
  • Optimal clarity due to modern menu guidance and 3.5" color display
  • Leak-tight and weather resistant due to encapsulated electronics
  • Improved safety on the job site due to lamp with pocket light function

 back to top

Putzmeister Advantages

Click the tab(s) below for more information.

Only Putzmeister has the technology to offer both high output and high pressure with the same setup.

Cell .16H
Rod side output 210 yd³/hr (160m³/hr)
Piston side output 141 yd³/hr (108m³/hr)
Rod side pressure 1233 psi (85 bar)
Piston side pressure 1885 psi• (130 bar•)
Material cylinder diameter 9" (230mm)
Stroke length 83" (2100mm)
Rod side strokes per minute 31
Piston side strokes per minute 21
 back to top
Cell .18H LS
Piston side output 238 yd³/hr (182m³/hr)
Piston side pressure 1233 psi (85 bar)
Material cylinder diameter 10" (250mm)
Stroke length 83" (2100mm)
Piston side strokes per minute 29
 back to top

Ideal for high-pressure applications, our S-Valve handles even the most extreme mixes with ease. Built for years of durability, its thick-walled valve construction features exclusive hard-chromed concrete cylinders and multi-piece piston cup design.

 back to top

All Putzmeister boom pumps feature the robust yet lightweight EZ Clean Out RS 909 hopper, which is engineered for performance and durability. Offering 19.4 cu. ft. (550L) capacity, the hopper uses one hard-faced remixer paddle motor and grate-mounted vibrator. The grate is constructed of high-strength steel with welded connections for a long wear life.

An innovative RFID safety switch incorporated in the hopper disables the machine when the grate is opened.

 back to top

Putzmeister pumps feature an exclusive free flow hydraulic system that performs to higher standards at lower cost than other pumps. Its valve-less intelligent monitoring system takes oil into the drive cylinders with no loss of pressure to enhance the pump’s service life while increasing power and convenience.







 back to top

Our exclusive Econo-Gear™ helps achieve greater fuel efficiency by performing the setup, pumping and cleanup operations in a gear that allows for the use of a lower engine speed. In addition to fuel savings, Econo-Gear also reduces stress on wear parts and lowers noise levels. 

 back to top

Putzmeister pumps feature an exclusive free flow hydraulic system that performs to higher standards at lower cost than other pumps. Its valve-less intelligent monitoring system takes oil into the drive cylinders with no loss of pressure to enhances the pump’s service life while increasing power and convenience.




 back to top

Low ceiling heights and unusual concrete placing challenges are easily tacked with the versatility of Putzmeister’s Z-Boom design. Booth the Multi-Z and Z-Fold configurations can begin a pour before the boom is fully unfolded. Additionally, these four- and five-section booms can easily maneuver around obstacles to achieve the maximum reach and flexibility possible.

 back to top

Putzmeister’s One-Sided Support (OSS) outrigger system allows the boom pump operator to reduce the outrigger span on the non-working side of the unit. Through a series of sensors, OSS safely achieves set up in confined areas without full outrigger deployment. The sensors maintain a defined working envelope that prevents the operator from positioning the boom outside of a safe operational range.

 back to top

Designed with the operator in mind, all newer Putzmeister models are lighter weight to offer greater capacity for payload, water and fuel. The new design also offers significantly more deck space for job site equipment and ease of movement around the deck

 back to top

Specification Tables

Click the tab(s) below for more information.

Boom Style
Boom Style Z-Fold
Number of sections 5
Height & Reach
Vertical reach 151' 3" (46.10m)
Horizontal reach 134' 11" (41.10m)
Reach from front of truck* 124' 8" (38.00m)
Reach depth 106' 4" (32.40m)
Unfolding height 36' 5" (11.10m)
Boom Section Articulation
1st section articulation 90°
2nd section articulation 180°
3rd section articulation 180°
4th section articulation 235°
5th section articulation 230°
Boom Section Length
1st section length 31' 10" (9.70m)
2nd section length 25' 7" (7.80m)
3rd section length 24' 7" (7.49m)
4th section length 27' 11" (8.50m)
5th section length 28' 3" (8.60m)
Outriggers
Outrigger spread: L-R-front hydraulically extend out & down 27' 11" (8.50m)
Outrigger spread: L-R-rear hydraulically swing out & extend down 29' 9" (9.08m)
One-Sided Support (OSS) Outriggers
Safe operational zone 135°
Outrigger spread: L-R-front hydraulically extend out down 17' 5" (5.30m)
Outrigger spread: L-R-rear hydraulically swing out & extend down 22' 3" (6.79m)

All specifications apply to units mounted on PMA stock truck - MACK MRU 613 with .16H pump cell.
Weights are approximate and include pump, boom, truck, driver and some fuel. Varies with options selected.
Dimensions will vary with different truck makes, models and specifications.
 back to top
Based on Model MACK MRU 613 with .16H pump cell
Length 39' 1" (11.90m)
Width 8' 2" (2.50m)
Height 12' 8" (3.88m)
Wheelbase 266" (6,756mm)
Front axle weight 32,831 lbs (14,892 kg)
Rear axle weight 37,289 lbs (16,914 kg)
Approx total weight 70,120 lbs (31,806 kg)

All specifications apply to units mounted on PMA stock truck - MACK MRU 613 with .16H pump cell.
Weights are approximate and include pump, boom, truck, driver and some fuel. Varies with options selected.
Dimensions will vary with different truck makes, models and specifications.
 back to top

Diagrams

Click the tab(s) below for more information.



print

End hose not to be operated in caution area.
Photos and drawings are for illustrative purposes only.
Dimensions will vary with different truck makes, models and specifications.
For available options, please contact the factory.

 back to top
print

Photos and drawings are for illustrative purposes only.
Dimensions will vary with different truck makes, models and specifications.
For available options, please contact the factory.

 back to top
print

Photos and drawings are for illustrative purposes only.
Dimensions will vary with different truck makes, models and specifications.
For available options, please contact the factory.

 back to top
print

With One-Sidded Support (OSS) outriggers.
End hose not to be operated in caution area.
Photos and drawings are for illustrative purposes only.
Dimensions will vary with different truck makes, models and specifications.
For available options, please contact the factory.

 back to top