Exceptional Reach, Lightweight Design
Low Unfolding Height For Pumping Indoors
Home  |  Products  |  Boom Pumps  |  32Z-Meter Truck-Mounted Concrete Boom Pump   Spec Sheet   Spec Sheet Spanish   Find a Distributor

Putzmeister 32Z-Meter Truck-Mounted Concrete Boom Pump

With exceptional reach in a compact and lightweight design, Putzmeister’s 32Z is a versatile addition to your fleet. Rack and pinion slewing provides better weight distribution and smooth rotation that increases reach by allowing pumping right in front of the cab. Easy setup and the four-section Multi-Z boom with 104 feet 6 inches of vertical reach provide a quality concrete pour in restrictive job sites. Its low GVW means convenient road travel and compliance with federal bridge weight restrictions.

Animations

Click the tab(s) below for more information.

Exclusive Ergonic® Control System

Ergonic Brochure

Click the tab(s) below for more information.

• A smoother pumping process
• Reduced component wear
• Low fuel consumption
• Fewer vibrations in the machine and boom
• Fully electronic control of the concrete pump
• Fewer hydraulic components
• Optimized output for greatest efficiency

 back to top

An integral component of the EPS module, Ergonic Output Control (EOC) reduced fuel consumption, wear and noise. EOC automatically adjusts the engine speed to the minimum required for the delivery rate specified by the operator on the remote control.

 back to top

The Ergonic system features the Ergonic Graphic Display (EGD), a three-inch square color LCD screen on the modular control box. When the equipment is on, the main menu shows:
• Hydraulic fluid temperature
• Operating hours
• Delivery pressure/delivery pressure limit
• Delivery rate/delivery rate limit

 back to top

Putzmeister Advantages

Click the tab(s) below for more information.

Only Putzmeister has the technology to offer both high output and high pressure with the same setup.

Cell .12H
Rod side output 144 yd³/hr (110m³/hr)
Piston side output 97 yd³/hr (74m³/hr)
Rod side pressure 1233 psi (85 bar)
Piston side pressure 1885 psi• (130 bar•)
Material cylinder diameter 9" (230mm)
Stroke length 83" (2100mm)
Rod side strokes per minute 21
Piston side strokes per minute 14
 back to top
Cell .16H
Rod side output 210 yd³/hr (160m³/hr)
Piston side output 141 yd³/hr (108m³/hr)
Rod side pressure 1233 psi (85 bar)
Piston side pressure 1885 psi• (130 bar•)
Material cylinder diameter 9" (230mm)
Stroke length 83" (2100mm)
Rod side strokes per minute 31
Piston side strokes per minute 21
 back to top

Ideal for high-pressure applications, our S-Valve handles even the most extreme mixes with ease. Built for years of durability, its thick-walled valve construction features exclusive hard-chromed concrete cylinders and multi-piece piston cup design.

 back to top


Putzmeister boom pumps feature a single proximity switch in each position. Redundancy is not necessary because the Ergonic Pump Control System can override the switches if necessary.

 back to top

All Putzmeister boom pumps feature the robust yet lightweight EZ Clean Out RS 909 hopper, which is engineered for performance and durability. Offering 19.4 cu. ft. (550L) capacity, the hopper uses one hard-faced remixer paddle motor and grate-mounted vibrator. The grate is constructed of high-strength steel with welded connections for a long wear life.

An innovative RFID safety switch incorporated in the hopper disables the machine when the grate is opened.

 back to top

Putzmeister pumps feature an exclusive free flow hydraulic system that performs to higher standards at lower cost than other pumps. Its valve-less intelligent monitoring system takes oil into the drive cylinders with no loss of pressure to enhance the pump’s service life while increasing power and convenience.







 back to top

By improving the pedestal construction with a bolt connection and simplifying the turret design, newer Putzmeister boom pumps can better handle the pump’s torsion forces resulting in less down time and lower maintenance costs.

 back to top

Our exclusive Econo-Gear™ helps achieve greater fuel efficiency by performing the setup, pumping and cleanup operations in a gear that allows for the use of a lower engine speed. In addition to fuel savings, Econo-Gear also reduces stress on wear parts and lowers noise levels. 

 back to top

Low ceiling heights and unusual concrete placing challenges are easily tacked with the versatility of Putzmeister’s Z-Boom design. Booth the Multi-Z and Z-Fold configurations can begin a pour before the boom is fully unfolded. Additionally, these four- and five-section booms can easily maneuver around obstacles to achieve the maximum reach and flexibility possible.

 back to top

Putzmeister’s One-Sided Support (OSS) outrigger system allows the boom pump operator to reduce the outrigger span on the non-working side of the unit. Through a series of sensors, OSS safely achieves set up in confined areas without full outrigger deployment. The sensors maintain a defined working envelope that prevents the operator from positioning the boom outside of a safe operational range.

 back to top

Putzmeister’s HBC-Radiomatic power boost and frequency hopping remote control system ensure minimum interference with other frequency transmitters. A fully proportional cable remote is also standard. Unlike other systems, the radio and cable remote systems are completely independently, offering redundancies to ensure complete proportional operation with either control.

 back to top

Designed with the operator in mind, all newer Putzmeister models are lighter weight to offer greater capacity for payload, water and fuel. The new design also offers significantly more deck space for job site equipment and ease of movement around the deck

 back to top

On all newer Putzmeister boom pumps the pipe layout features only a single bend in the turret and two elbow sizes – 45-degree and 90-degree – parts commonality has been increased and wear has been decreased. Additionally, the pipe hanger brackets have bolt connections for extended life and easier wear.

 back to top

Specification Tables

Click the tab(s) below for more information.

Boom Style
Boom Style Multi-Z
Number of sections 4
Height & Reach
Vertical reach 106' 0" (32.30m)
Horizontal reach 91' 10" (28.00m)
Reach from front of truck* 83' 8" (25.50m)
Reach depth 67' 3" (20.50m)
Unfolding height 24' 11" (7.60m)
Boom Section Articulation
1st section articulation 96º
2nd section articulation 180º
3rd section articulation 255º
4th section articulation 232º
Boom Section Length
1st section length 27' 11" (8.50m)
2nd section length 21' 8" (6.60m)
3rd section length 21' 8" (6.60m)
4th section length 21' 8" (6.60m)
Outriggers
Outrigger spread: L-R-front hydraulically extend out & down 18' 0" (5.50m)
Outrigger spread: L-R-rear hydraulically swing out & extend down 22' 4" (6.80m)
Outrigger load: Front 31,473 lbf (140 kN)
Outrigger load: Rear 34,845 lbf (155 kN)
One-Sided Support (OSS) Outriggers
Safe operational zone 120º
Outrigger spread: L-R-front hydraulically extend out down 12' 10" (3.90m)
Outrigger spread: L-R-rear hydraulically swing out & extend down 18' 5" (5.60m)

All specifications apply to units mounted on PMA stock truck - MACK MRU 613 with .16H pump cell.
Weights are approximate and include pump, boom, truck, driver and a full fuel tank. Varies with options selected.
Dimensions will vary with different truck makes, models and specifications.
Maximum theoretical values listed.
 back to top
Based on Model MACK MRU 613 with .16H pump cell
Length 36' 5" (11.09m)
Width 8' 2" (2.50m)
Height 12' 10" (3.90m)
Wheelbase 223" (5,664mm)
Front axle weight 17,641 lbs (8,002kg)
Rear axle weight 33,352 lbs (15,128kg)
Approx total weight 50,993 lbs (23,130kg)

All specifications apply to units mounted on PMA stock truck - MACK MRU 613 with .16H pump cell.
Weights are approximate and include pump, boom, truck, driver and a full fuel tank. Varies with options selected.
Dimensions will vary with different truck makes, models and specifications.
Maximum theoretical values listed.
 back to top

Diagrams

Click the tab(s) below for more information.



print

End hose not to be operated in caution area.
Photos and drawings are for illustrative purposes only.
Dimensions will vary with different truck makes, models and specifications.
For available options, please contact the factory.

 back to top
print

Photos and drawings are for illustrative purposes only.
Dimensions will vary with different truck makes, models and specifications.
For available options, please contact the factory.

 back to top
print

Photos and drawings are for illustrative purposes only.
Dimensions will vary with different truck makes, models and specifications.
For available options, please contact the factory.

 back to top
print

With One-Sidded Support (OSS) outriggers.
End hose not to be operated in caution area.
Photos and drawings are for illustrative purposes only.
Dimensions will vary with different truck makes, models and specifications.
For available options, please contact the factory.

 back to top