Home  |  Products  |  Putzmeister Shotcrete Technology  |  S5 GH Rotor/Stator Pump   Spec Sheet   Find a Distributor

Putzmeister S5 GH Rotor/Stator Pump

The compact gasoline-powered S5 GH from Putzmeister is a popular model for outside plaster and stucco work along with pressure grout, vermiculite, swimming pool finish, and pipeline refurbishment. You get precise control with the four-speed pump, and operators appreciate the electric start. The new hydraulic drive gives you the ease of fully variable volume output and a reverse pump feature to relieve line pressure.

Putzmeister Advantages

Click the tab(s) below for more information.

Our innovative adjustable rotor/stator pumps are pre-set at the factory to only 75 percent of its maximum pressure, allowing several adjustments to be made as the rubber wears. This results in three to four times more life compared to non-adjustable pumps.

 back to top

Ideal for fireproofing, injection work, stucco/plaster, pressure grouting and so forth. Our compact yet powerful S5 pumps and mixers tackle a variety of materials with ease.

 back to top

Specification Tables

Click the tab(s) below for more information.

Industries/Process Type
Industries Mortar
Process type Wet or Dry
Performance
Maximum volume output* 1.5 ft³/min • 44 lpm • 21 bags/hr
Horizontal pumping distance* 260' (80m)
Vertical pumping distance* 195' (60m)
Maximum pressure 360 psi (25 bar)
Volume control Variable
Directional control Reversing
Technical Information
Hopper height 26" (660mm)
Outlet diameter 2" (50mm)
Pump size 2L6
Power
208/230V 20 hp (15kW) Gas
Air compressor 10 cfm (283L/min)
Dimensions
Length 107" (2,718mm)
Width 28.50" (724mm)
Height 35" (889mm)
Weight (approximate) 750 lbs (340kg)

*These figures will vary due to differences in mix design, line size and job site conditions. Full pressure and volume cannot be attained simultaneously. All specifications are subject to change without notice.
 back to top