Home  |  Products  |  Putzmeister Shotcrete Technology  |  S5 EV Rotor/Stator Pump   Spec Sheet   Spec Sheet Spanish   Find a Distributor

Putzmeister S5 EV Rotor/Stator Pump

As the number one choice for asbestos abatement applications in North America, the compact, electrically powered Putzmeister S5 EV has powerful features, including variable-frequency drive (VFD), variable-speed motor with gear drive, reversing, and variable-speed remote control.

Putzmeister Advantages

Click the tab(s) below for more information.

VFD easily converts single-phase power into more efficient and reliable three-phase power to achieve maximum outputs and the highest productivity. The variable speed motor runs efficiently at speeds from 360 to 3,600 rpm. When re-starting, the motor starts at low speed and ramps up to the last speed setting. Combined with the VFD, this eliminates the belt box and reduces motor damage.

A convenient speed control at the nozzle lets operators adjust the material output electronically any time during pump operation. This eliminates manually operating a hand wheel at the pump.

 back to top

Our innovative adjustable rotor/stator pumps are pre-set at the factory to only 75 percent of its maximum pressure, allowing several adjustments to be made as the rubber wears. This results in three to four times more life compared to non-adjustable pumps.

 back to top

Ideal for fireproofing, injection work, stucco/plaster, pressure grouting and so forth. Our compact yet powerful S5 pumps and mixers tackle a variety of materials with ease.

 back to top

Specification Tables

Click the tab(s) below for more information.

Industries/Process Type
Industries Mortar
Process type Wet or Dry
Performance
Maximum volume output* 1.5 ft³/min • 44 lpm • 21 bags/hr
Horizontal pumping distance* 260' (80m)
Vertical pumping distance* 195' (60m)
Maximum pressure 360 psi (25 bar)
Volume control Variable
Directional control Reversing
Technical Information
Hopper height 30" (762mm)
Outlet diameter 2" (50mm)
Pump size 2L88 (Super 2L6)
Power
208/230V 75 hp Elec 60Hz
Continuous full load 24 amps 3ø
Amp draw @208V 42 amps 1ø
Air compressor 10 cfm (283L/min), 2 hp (1.5kW) motor, 208/230V 60Hz
Continuous full load 7 amps 3ø
Amp draw @208V 12 amps 3ø
Dimensions
Length 95.50" (2,426mm)
Width 28.50" (724mm)
Height 31" (788mm)
Weight (approximate) 800 lbs (363kg)

*These figures will vary due to differences in mix design, line size and job site conditions. Full pressure and volume cannot be attained simultaneously. All specifications are subject to change without notice.
 back to top