Home  |  Products  |  BSA Trailer Pumps  |  BSA 2108 HP-E Trailer-Mounted Concrete Pump   Spec Sheet   Spec Sheet Spanish   Find a Distributor

Putzmeister BSA 2108 HP-E Trailer-Mounted Concrete Pump

Extra muscle fort hose difficult jobs, the BSA 2108 HP-E makes quick work of tough mixes. Putzmeister's exclusive Free Flow Hydraulics gives you powerful performance across multiple applications.

Specification Tables

Click the tab(s) below for more information.

Performance
Maximum theoretical output* - rod 124 yd³/hr (95m³/hr)+
Maximum theoretical output* - piston 86 yd³/hr (66m³/hr)+^
Maximum theoretical pressure* - rod 2,176 psi (150 bar)+
Maximum theoretical pressure* - piston 3,190 psi (220 bar)+^
Technical Information
Material cylinders 8" x 83" (200 x 2,100mm)
Variable volume 0 to full
Chromed cylinders Standard
Hydraulic system FFH-EPS
Hydraulic system pressure 5,075 psi (350 bar)
Hydraulic cylinders 6.3" x 3.5" (160 x 90mm)
Maximum size aggregate 2.5" (63mm)
Valve & Hopper
S-Valve S-1812D
Hopper model RS 905HF
Hopper capacity 21.2 ft³ (600L)
Hopper height 50" (1,270mm)
Maximum strokes per minute - rod 24
Maximum strokes per minute - piston 17

* Specifications subject to change without prior notice. Maximum theoretical values listed above. Maximum output and pressure cannot be achieved simultaneously.
+ SBU Standard
^ Special equipment configurations required to operate on piston side 
Minimum slump and maximum aggregate size are dependent upon concrete mix design, site conditions and pipeline diameter. Special equipment configurations required to operate on piston side. Photos and drawings are for illustrative purposes only. For available options, please contact the factory.
 back to top
Engine Specifications
Diesel Engine / Motor 460V/60hz
Power 335 hp (250kW)

* Specifications subject to change without prior notice. Maximum theoretical values listed above. Maximum output and pressure cannot be achieved simultaneously.
+ SBU Standard
^ Special equipment configurations required to operate on piston side 
Minimum slump and maximum aggregate size are dependent upon concrete mix design, site conditions and pipeline diameter. Special equipment configurations required to operate on piston side. Photos and drawings are for illustrative purposes only. For available options, please contact the factory.
 back to top