Home  |  Products  |  BSA Trailer Pumps  |  BSA 14000 HP-D4 8" Trailer-Mounted Concrete Pump   Spec Sheet   Spec Sheet Spanish   Find a Distributor

Putzmeister BSA 14000 HP-D4 8" Trailer-Mounted Concrete Pump

The BSA 14000 HP-D 8" is a powerful pump with maximum volume at the greatest distances. It has maximum output of 133 cubic yards per hour at pressures up to 2,176 psi with 8-inch x 83-inch material cylinders to fit any job requirement.

Putzmeister Advantages

Click the tab(s) below for more information.

Only Putzmeister has the technology to offer both high output and high pressure with the same setup.

Simple and reliable, Putzmeister's closed loop, free flow hydraulics (FFH) design provides a smoother, more controllable and economical approach to pumping. The pump has a fully adjustable volume control to allow very slow pumping while retaining full concrete pressure. Convenient to use and easy to service, this exclusive system is known for its performance and reliability worldwide.

 back to top

Our powerful pumps make quick work of tough mixes by handling pumpable consistencies down to a 0" slump with a maximum 2.5" aggregate size.

 back to top

With a 21.2 cubic foot capacity, the RS 905A hopper offers an agitator with safety switch-off, splash guard, vibrator, grate and rubber collar. Its wide opening allows for simultaneous unloading of mixer trucks and provides central lubrication via a manual grease gun.

 back to top

Designed for highway travel and job site use, this steel frame trailer is fully equipped with four manually-operated outriggers and front jack stand with support wheel on towbar.

 back to top

Special hard-chromed material cylinders and automatic central lubrication of the heavy-duty solid rubber pistons assure long service life.

 back to top

The control panel is fully enclosed for weatherproof wear and includes an emergency stop button. The remote control, with 33 feet of cable, featurs pump on/off, pump forward/reverse and stroke change. An auxiliary hydraulic connection on the pump is standrad for the 2100 and 14000 Series.

 back to top

Ideal for high pressure applications, our S-Valve handles even the most extreme mixes with ease. Built for years of durability, its thick-walled valve construction features exclusive hard-chromes material cylinders and multi-piece piston cup design.

 back to top

Specification Tables

Click the tab(s) below for more information.

Performance
Maximum theoretical output* - rod 133 yd³/hr (102m³/hr)
Maximum theoretical output* - piston 92 yd³/hr (70m³/hr)
Maximum theoretical pressure* - rod 2,176 psi (150 bar)
Maximum theoretical pressure*^ - piston 3,190 psi (220 bar)
Technical Information
Material cylinders 8" x 83" (200x2,100mm)
Variable volume 0 to full
Chromed cylinders Standard
Hydraulic system FFH-EL
Hydraulic system pressure 5,075 psi (350 bar)
Hydraulic cylinders 6.3" x 3.5" (160x90mm)
Outlet diameter ZX125
Maximum size aggregate 2.5" (63mm)
Valve & Hopper
S-Valve S-1812D
Hopper model RS 905HF
Hopper capacity 21.2 ft³ (600L)
Hopper height 51" (1,295mm)
Maximum strokes per minute - rod 26
Maximum strokes per minute - piston 18
Dimensions
Trailer type Tandem axles
Length 308" (7,830mm)
Width 101" (2,560mm)
Height 142" (3,600mm)
Approximate weight 25,340 lbs (11,600kg)

* Specifications subject to change without prior notice. Maximum theoretical values listed above. Maximum output and pressure cannot be achieved simultaneously.
^ Special equipment configurations required to operate on piston side.

Minimum slump and maximum aggregate size are dependent upon concrete mix design, site conditions and pipeline diameter. Special equipment configurations required to operate on piston side.
Photos and drawings are for illustrative purposes only. For available options, please contact the factory.
 back to top
Engine Specifications
Diesel Engine / Motor Caterpillar
Power 630 hp (470kW)

* Specifications subject to change without prior notice. Maximum theoretical values listed above. Maximum output and pressure cannot be achieved simultaneously.
^ Special equipment configurations required to operate on piston side.

Minimum slump and maximum aggregate size are dependent upon concrete mix design, site conditions and pipeline diameter. Special equipment configurations required to operate on piston side.
Photos and drawings are for illustrative purposes only. For available options, please contact the factory.
 back to top