Home  |  Parts & Accessories  |  Shotcrete Parts & Accessories  |  Dry Process  |  Hydro-Mix Nozzles

Hydro-Mix Nozzles

Ideal for use when pre-dampening isn’t practical, a 30-inch (762mm) or longer hose extension between nozzle body and nozzle tip allows for more complete wetting and material mixing. This nozzle normally has a Hamm tip and nozzle but others will fit the same threads. Certain materials require even more wetting than the single nozzle body hydro-mix.

Various combinations of one or two nozzle bodies are employed, either close-coupled or as far as 10 feet (3m) apart. Occasionally, the second nozzle body is used for liquid admixtures. Alloy nozzle bodies and 2-inch (51mm) sizes are available. The longer version shows water valve extension close to the nozzle and nozzle body farther back, for additional wetting.

Technical Information

Size Hydro-Mix Size Complete Assembly Part #
1" (25mm) 30" (762mm) AST23740
1-1/4" (32mm) 30" (762mm) AST23741
1-1/2" (38mm) 30" (762mm) AST23743
1-1/2" (38mm) Swivel Body 30" (762mm) AST23755
1-1/2" (38mm) Vesuvius Special 30" (762mm) AST76500
1-1/2" (38mm) Aluminum Swivel Body 96" (2,438mm) AST76011
1-1/2" (38mm) Brass APG Body 96" (2,438mm) AST76012
1-5/8" (41mm) 30" (762mm) AST23744
2" (51mm) 30" (762mm) AST23745
2" (51mm) Nozzle Tip (soft) 96" (2,438mm) AST76010