Putzmeister 52Z-Meter Concrete Boom Pump Features Modified Pedestal Design
Putzmeister 52Z-Meter Concrete Boom Pump Features Modified Pedestal DesignThe Putzmeister 52Z-Meter truck-mounted concrete boom pump has been modified with a new TRDV 180 pedestal design. The pedestal design is modular for better serviceability, and it allows easier setup and a more simplified operation.
A new optimized outrigger design now features triple-telescopic front outriggers that stow between the front axles and feature a short slewing cylinder. During setup, this allows the front outriggers to swing out within a tight 45-degree angle and then extend. The space now needed for swinging the front outrigger is one-fourth the area of the previous version; and therefore, the operator can easily set up on very confined job sites.
A narrow 32-foot 10-inch (10m) rear and 35-foot 9-inch (10.9m) front footprint enables setup on congested sites. The rear outrigger hinge pins are closer to the center of the boom for the optimum distribution of forces and stress. Plus, the outrigger leg stows between the front axles, and extra fuel can be stored in the right hand side rear outrigger leg for longer running times.
The Putzmeister 52Z still features its unique Multi-Z boom configuration for more effective reach areas difficult to access and a low unfolding height for work inside buildings with low ceiling height. It reaches 170-foot vertical heights and 158-foot horizontal lengths with its versatile 5-section boom.
A 24-volt system is standard and offers the flexibility of add-on features. Other innovative options are also available. For more details, contact Putzmeister toll-free at 800-884-7210 or (262) 886-3200.